Jewelry display

As you know, I made a lot of jewelry from old cutlery (see HERE and HERE) in the past month. In order to showcase these, I needed a jewelry display for necklaces and so I finally got around to upcycle a wine box, which I had laying around for almost a year. The line between crafters and hoarders is sometimes very thin, especially when one makes much upcycling and so I am always proud when I can once again prove to myself that it is sometimes useful to keep things that many other people would throw away.

There are probably not many of you that need a jewelry display but for those of you that woke up this morning with the sudden urge to build one, I made this tutorial.

Material

kiste

As material you need a small wine box.

Step 1

kiste2

First I sawed the wine box in two halves…

Step 2

kiste3

…and then painted both with colors that I had lying around.

Step 3

kiste4

Next, I placed the bottom half of the box upside down, put the upper half upright on one end and then predrilled holes where I wanted the two halves to be connected later.

Step 4

kiste5

At the top of the upright half I drilled on the back a lot of small holes …

Step 5

kiste6

…and then screwed eight different round hooks into the holes.

Step 6

kiste7

Next I screwed the two halves together, as announced …

Step 7

kiste8

… and finally I’ve glued a small wooden sign with my “label” over the hooks. Now I only had to wrap the necklaces around the hooks and lay out a couple of longer necklaces on the bottom part.

display

Dieser Beitrag ist auch verfügbar auf: German


RELATED POST

COMMENTS ARE OFF THIS POST